Wire Belt Company




 Splicing Flat-Flex XT Belts

The use of one- and three-space splice clips are recommended for installing Flat-Flex® XT belts. Consult the chart below for the recommended number and combinations of one- and three-space clips to use for the number of spaces across the width of various Flat-Flex® XT belts. These numbers may be different than for classic Flat-Flex.
24 x .072 XT
Belt Width
# XT Spaces*
# of Clips
 3-Space + 1-Space Clips
  
42 x .062 XT
Belt Width
# XT Spaces*
# of Clips
 3-Space + 1-Space Clips
11.94 to 14.50
5
2 + 1
14.56 to 17.00
6
3 + 0
17.19 to 19.75
7
3 + 1
19.81 to 22.25
8
4 + 0
22.44 to 25.00
9
4 + 1
25.05 to 27.50
10
5 + 0
27.69 to 30.25
11
5 + 1
30.31 to 32.75
12
6 + 0
32.94 to 35.50
13
6 + 1
35.56 to 38.00
14
7 + 0
38.19 to 40.75
15
7 + 1
40.81 to 43.48
16
8 + 0
10.06 to 12.88
4
2 + 0
12.94 to 15.75
5
2 + 1
15.81 to 18.50
6
3 + 0
18.56 to 21.38
7
3 + 1
21.44 to 24.25
8
4 + 0
24.31 to 27.13
9
4 + 1
27.19 to 30.00
10
5 + 0
30.06 to 32.88
11
5 + 1
32.94 to 35.75
12
6 + 0
35.81 to 38.63
13
6 + 1
38.69 to 40.50
14
7 + 0
40.56 to 42.00
15
7 + 1

*Also the required number of sprockets needed. Use one sprocket for every XT (narrow) space.

 

 

IMPORTANT NOTE:
If you prefer to use single space clips exclusively, you use the same number of clips as XT spaces - placing the clips only in the XT spaces.
 
 
Wire Belt Company of America • 154 Harvey Road, Londonderry, NH 03053 • Tel: 603-644-2500 • Fax: 603-644-3600
Site Map • Terms & Conditions • © 2005 Wire Belt Company of America • An ISO 9001:2000 Registered Company • Last Update 8-03-05