Wire Belt Company
Drive Components

 

Belt Drive Components

Sprocket Materials

When choosing the most appropriate sprocket material for your application, it is important to look at the conditions under which the belt will operate. Conditions such as abrasion, corrosion, high/low temperature variations, surrounding temperature, type of process performed, etc. all have an impact on sprocket selection. Available material types include: Type 303 stainless steel - which is highly recommended for all applications, especially in food processing industries because it is FDA approved for direct contact with food.

Polyacetal plastic - usually preferred for light loads, where the operating temperature range is limited to between 0°F to 150°F, and is also FDA approved for food processing applications.

Blanks are used to complement sprockets and as belt supports... especially along the outside edges of the belt. When used on the same shaft with drive sprockets, blanks should be the same diameter as the root diameter of the sprockets and made of the same material. Blanks may also be used for support in other areas, such as on idler shafts.

Stock Drive Sprockets and Blanks for Flat-Flex Belts

Selection of Standard Drive Sprockets & Blanks for Flat-Flex Belts
 
 

How to Determine Sprocket/Blank Part Numbers

– Insert letter for material ordered in the square provided. Example: G72-2075 is a Stainless Steel Sprocket.

= Stainless Steel         = (Delrin®) Polyacetal Plastic

Wire Belt Drive Components
Strands per foot x Wire Diameter
Sprocket Diameter
# of Teeth
Root Diameter
Bore
Sprockets part #
Blanks part #
72 x .035 and 72 x .050
1.25”
2.00”
2.00”
20
34
34
1.08”
1.85”
1.85”
1/2”
3/4”
1”
G72-125050
G72-2075
G72-2100
B108050
B185075
B185100
54 x .035 and 27 x .050
2.00”
3.00”
3.00”
25
39
39
1.80”
2.80”
2.80”
3/4”
3.4”
1”
G54-2075
G54-3075
G54-3100
B180075
B280075
B280100
48 x .050
1.25”
2.00”
3.00”
3.00”
13
22
35
35
1.08”
1.77”
2.80”
2.80”
1/2”
3/4”
3/4”
1”
G48-125050
G48-2075
G48-3075
G48-3100
B108050
B177075
B280075
B280100
42 x .050 and 42 x .062
1.25”
1.25”
1.25”
2.00”
2.00”
3.00”
3.00”
12
12
12
20
20
29
29
1.08”
1.08”
1.08”
1.80”
1.80”
2.70”
2.70”
1/2”
5/8”
3/4”
3/4”
1”
3/4”
1”
G42-125050
G42-125063
G42-125075
G42-2075
G42-2100
G42-3075
G42-3100
B108050
B108063
B108075
B180075
B180100
B270075
B270100
32 x .082
2.00”
3.00”
4.25”
15
22
32
1.80”
2.66”
3.85”
3/4”
1”
1”
G32-2075
G32-3100
G32-425100
B180075
B266100
B385100
24 x .072 and 24 x .092
1.63”
2.00”
3.00”
3.00”
4.25”
8
11
17
17
24
1.28”
1.77”
2.70”
2.70”
3.83"
3/4”
3/4”
3/4”
1”
1”
G24-163075
G24-2075
G24-3075
G24-3100
G24-425100
B128075
B177075
B270075
B270100
B383100
15 x .092
3.00”
4.25”
10
15
2.58”
3.91”
3/4”
1”
G15-3075
G15-425100
B258075
B391100
Wire Belt Company of America • 154 Harvey Road, Londonderry, NH 03053 • Tel: 603-644-2500 • Fax: 603-644-3600
Site Map • Terms & Conditions • © 2005 Wire Belt Company of America • An ISO 9001:2000 Registered Company